Topic on Talk:Kogence

Jump to: navigation, search
Professortrex (talkcontribs)

how can I monitor the status of my nwchem job?

ok. it says "init"

about 10 min

ok, sorry

NWChem, 8CPUs 15 GiB Memory (Intel Xeon, Haswell)

OK, I added admin. Thanks!

thank you. that got farther than previously. I'll try to correct the error and restart

oops, too late. I fixed the issue and hit Run

Simulation was submitted... RunJob: Running simulation in cloud... Info: RunJob: Looking for machine ... RunJob: Started instance for running job.

not yet. I still see the "init" state

ok, it ran. thanks!

Centaure99 (talkcontribs)

Click on Avatar on top right corner. Then click My Models.

It will show if your job has started running. Once it has started running, the Visualizer button will become active.

You can click to connect to remote server running your job.

How long back did you start the job?

Remote server should boot up within 3minutes.

Give me 1 minute. Let me ask technical team to check.

Can you send me a screen shot ?

Can you include the browser address bar as well on the screenshot?

Please send me the screen shot. I need to see other things.

Thanks. What machine and which software did you select? My engineering teams needs to debig this a little bit. Please give us 5minutes.

I have killed the job and reset the status of the job to error. Can you add a collaborator with admin privileges to the model? We will take a look and fix it. Apologies for the trouble.

Give me 30mins. We will get back to you. Thank you for your patience.

We tested the model. We can successfully run it. Server boots up properly. But your input file has technical errors. Please see the output here:

Can you try running it once more? I want to make sure that it also executes for you even though it will show errors. But machine should still come up and execute and it should not be stuck in "init" state.

Before you fix the error can you just try to restart the model from your account and let me know if you still see it being stuck in "init" state ?

No worries. Let me know if you see "Visualize" coming alive?

It will be there just for a second, because job might end with errors.

Can you refresh your browser?

Great. Thank you for your patience!

Pls let me know if you have any further problems. If job runs longer then you will have time to connect to Visualizer and interact with remote machine.

If you dont want machine to terminate with job ending then in the Settings->Software you can add a terminal program like xterm or gnome-terminal.

That will hold machine until you manually kill the xterm.